Gepoederde Inlays (De Metaalmethode)

Move beyond simple engraving. Powder-fused inlays allow you to embed metallic, iridescent, or high-contrast colors directly into wood or stone using specialized powders that fuse under the heat of the laser beam.

Key Points

→Material Choice: Closed-grain woods (Maple, Cherry) prevent powder from bleeding into surrounding fibers.
→Fusion Temperature: Diodes must move slow enough to melt the powder but fast enough not to ignite the base material.

Procedure

1
Engrave a deep pocket (approx 0.5mm - 1.0mm) in your base material.
2
Fill the channel with inlay powder. Use a straight edge to level the surface.
3
Run a second pass at 20% power, 500mm/min to fuse the powder into a solid mass.

Safety Checklist

→Do not use powders containing lead or cadmium. Use only laser-safe inlay materials.

Seo

Description:Move beyond simple engraving. Powder-fused inlays allow you to embed metallic, iridescent, or high-contrast colors directly into wood or stone using specialized powders that fuse under the heat of the laser beam.

Meta Description:Move beyond simple engraving. Powder-fused inlays allow you to embed metallic, iridescent, or high-contrast colors directly into wood or stone using specia

Meta Title:Powder-Fused Inlays (The Metallic Method) | Laserhuis

Og Title:Powder-Fused Inlays (The Metallic Method)

Title:Powder-Fused Inlays (The Metallic Method)